Specialty hardware can be really annoying. Take the T-bolt—it’s essential for attaching anything to a T-track, but where can you buy one at a moment’s notice? Hardware stores don’t carry T-bolts, but I’ve found that they always have a good …
Sour…
Ordinary push pads tend to slip, I’ve found, when face-jointing a board. I modified one of mine by cutting 1/2″ of the rubber padding off its back end and then screwing on a 1/2″ x 1/2″ cleat. Now the …
Source
Old bandsaw blades can easily be recycled into useful marking or carving knives. One blade nets you a slew of small pieces. Use a tin snip to cut off a piece of the blade, grind off the teeth, and then …
Source
When finishing a flat panel, I use plastic soda bottle caps as standoffs to raise the panel above the bench. First, I finish the back side of the panel. Then I set the wet side on the upturned soda caps …
Source
Hammered Cat The handle on my favorite hammer needed to be refinished, so I sanded it, sprayed on a coat of polyurethane and hung it over the edge of the picnic table to dry. A moment later I heard a …
Source