I made a go-anywhere task light by retrofitting an old, broken fixture with a new, battery-powered LED light. First, I removed the cord and inner workings from the task light. Then I screwed a plywood disc into the light’s …
Source
After ruining four $90 sheets of plywood by storing them on a damp floor, I came up with a simple fix: PVC feet. Cut several 12″ sections of 2″ dia. PVC pipe in half, lengthwise. Apply traction tape to the …
Source
For years, I sanded and hand planed panel edges by laying them flat on my workbench. I could never quite squeeze a bench vise into my woodworking budget, so I came up with this fast, inexpensive clamp rail. I recessed …
Source
A friend needed a small tool to clean out glue inside small places. So I made him a mini-scraper using an indexable blade from my planer, screwed to a turned handle. Each blade is about $3, plus the screw and …
Source
Bottle Cap Jig Knobs I’m always trying to use up scraps and stuff that would otherwise end up in the trash. My latest devices are jig knobs made with plastic bottle caps, which have a grippy surface on their edges.…
Source