Adjustable Thin-strip Jig
Here is my adjustable jig for ripping thin strips on a table saw. Used with a push stick and zero-clearance insert, it keeps my hands a safe distance away from the sawblade. The base is MDF that’s 3⁄…
Source
Category Archives: Jigs and Fixtures
Dowel-cutting Cradle
I find cutting dowels on the band saw to be a hassle. For one thing, the blade can grab the round stock and twist it out of your hand if you’re not using a support cradle guided by the miter …
Source
Notched Batten for Planing
A notched batten is one of the best jigs you can make to help in hand planning. This simple thin hardwood strip has a hoof-shaped notch at its end and is used to prevent boards from shifting during planing. The …
Source
Kerf Jigs for Perfect Cuts
Making long, perfectly straight cuts with handheld power saws, such as jigsaws and circular saws, can be a real challenge. They aren’t difficult when a straightedge is used as a guide, but putting that straightedge in the right place …
Source
Handsaw Tenon Jig
This simple jig enables you to cut accurate tenons and slice very thin pieces. I use a flush-cut saw because it has no set to its teeth and, therefore, won’t damage the jig. Plus it leaves a smooth surface.…
Source