Edge-Knot Repair
Filling knots with colored epoxy usually works quite well, but sometimes the void is in a spot that’s difficult to fill, like the edge of a board. Here’s how to do it. First, apply some paste wax to a piece …
Source
Category Archives: Repair
Unexpected Out of the Box Chair Restoration – Part 6
As you recall, a few months ago, I wrote about a beautiful chair made of solid mahogany that we bought and found out that it was sadly damaged during shipping. The vendor sent us a replacement, but I decided to …
Source
Hand Plane Restoration
Bringing an old hand plane back to life is simple to do, and will yield a top-not tool. When I build a project, I use a variety of “fancy” tools (readers’ words, not mine). Lie-Nielsen, Bill Carter, and Blue Spruce, …
Source
Yet Another Rendezvous With Our New but Broken Bamboo Chairs
If you recall, a few weeks ago, I wrote about the unexpected repair job I performed on one of our newly bought solid mahogany chairs (read parts one and two here). What I didn’t expect is that I would have …
Source
Clamps for Delicate Work
Most of the clamps in our woodworking arsenal are designed to produce tons of pressure per square inch. While we use them to hold pieces over the workbench, close joints, or keep glued parts from moving while the glue dries, …
Source