Sawing with Sticky Notes
When using my miter saw, I’ve found that the easiest way to sneak up on a line is to use a stack of sticky notes. First, set a stop block to cut your part slightly oversize (1/16″ is plenty). …
Source
Category Archives: Shop Tips
Wipe, Don’t Brush Stain
Wiping is fast, almost as fast as spraying (without the downside of having to clean the spray gun). Wiping is also every bit as effective in all situations except possibly into recesses such as inside corners, fluting, deep carvings and the like.
Source
Vacuum-Hose Dust Control
Dust is a real problem when you can’t use a router table’s fence and its dustport. Here’s a clever way to suck up that dust using your shop vacuum’s nozzle.
Source
Universal Shooting Board
I used to have three shooting boards for planing end grain: one for 90° cuts, one for 45° horizontal miters and one for 45° vertical miters. Now I’ve combined them all into one. The jig’s main body is a typical …
Source
Bit Jack
Here’s a trick for I use for removing a stubborn router bit from the collet. I cut 1/2″ wide slots in a few credit card-size pieces of laminate. I then slide as many cards as I can fit between the …
Source