Multiple Plugs
Faced with cutting hundreds of plugs for a big project, I came up with this idea: I cut the plugs a little deeper than needed. Then I ran strips of masking tape down the faces of the plugs. When …
Source
Category Archives: Tricks of the Trade
5 Nifty Storage Solutions in Your Shop
Everyone can use some creative storage solutions in their shop, which is why we dug through the American Woodworker archives for some classic storage tips. Portable Hose Reel Instead of mounting my compressor’s hose reel to the wall, I mounted …
…
Deadbolt Bench Stop
For a quick and simple bench stop, I mounted a sliding bolt taken from an old door to the end of my workbench. In the locked position, the bolt stays put, and in the unlocked position it’s completely out of …
Source
Two-Sided Tablesaw Insert
I needed a 1/4″ zero-clearance throat plate for cutting dados the other day, but my throat plate only had a 3/4″ slot in it. I didn’t want to interrupt my project to make or buy a new throat plate, so …
Source
Disposable Guide Blocks
I’ve bandsawn hundreds of puzzle pieces using very small blades. I gave up on the steel guide blocks that came with my saw because when those little blades come in contact with the blocks, they’d dull right away. And, when …
Source