Sawing with Sticky Notes

Category Archives: Tricks of the Trade

Sawing with Sticky Notes

Brad Holden AW153, Miter Saws, Sawing Techniques, Shop Tips, Techniques, Tenons, Tricks of the Trade, Workshop Tips

When using my miter saw, I’ve found that the easiest way to sneak up on a line is to use a stack of sticky notes. First, set a stop block to cut your part slightly oversize (1/16″ is plenty). …
Source

Comments Off

Glove Save

Ray Lanham AW134, Finishing, Finishing Techniques, Techniques, Tricks of the Trade, Workshop Tips

After brushing the first coat of finish on my shelf project, quite a bit remained in the disposable cup. I didn’t want to pour it back, because that would contaminate the fresh finish that remained in the can. But I …
Source

Comments Off

Glove Save

Ray Lanham AW134, Finishing, Finishing Techniques, Techniques, Tricks of the Trade, Workshop Tips

Comments Off

Gambler’s Micro-Adjust

American Woodworker Editors AW131, Micro Fence, Router Table, Techniques, Tricks of the Trade, Workshop Tips

Gambler’s Micro-Adjust Precise fence adjustments are a sure bet when I clamp this shop-made device on my router table. I simply drilled and tapped a hole to accept a 1/4″-20 machine screw through the center of a 3/4-in. by 1-in. …
Source

Comments Off