This reader was looking for a cost effective alternative to epoxy pours that gives a similar look. Here is one possible option for small projects.
The post Cheaper Infill Option to Epoxy appeared first on Woodworking | Blog | Videos | Plans | How To.
Read more I built a deep drawer for my workbench so I would have lots of storage, but it created another problem. The tools I wanted were always at the bottom of the heap. I solved my frustration by adding an …
Source
Edited by Kari Hultman
Pages: 12-13
From the February 2012 issue #195.
Buy the issue now.
Three main design features enable it to work well. The runners are made of hard maple that resists wear and tear. The sliding mechanism is a dovetail that…
Read moreSometimes you need to clamp parts that are out of reach of the throat depth of standard clamps. Here’s a design for a long-reach clamp that can be made from 2×4 lumber, 3⁄4” plywood or solid-wood …
Source
Here’s a simple way to protect your chisels from getting nicked and rusty rattling around in your toolbox. Just cut the fingers off some old leather work gloves. Poke holes with an awl at the open end, and thread a …
Source