Cut Flat Dados on a Round Surface
I needed to cut stopped grooves on a round surface – and while I could have cut them on the stock while it was square, then proceed to turn it on the lathe, I didn’t want to worry about catching …
Source
Category Archives: Tricks of the Trade
Cheaper Infill Option to Epoxy
This reader was looking for a cost effective alternative to epoxy pours that gives a similar look. Here is one possible option for small projects.
The post Cheaper Infill Option to Epoxy appeared first on Woodworking | Blog | Videos | Plans | How To.
Read moreDeep Drawer Organizer
I built a deep drawer for my workbench so I would have lots of storage, but it created another problem. The tools I wanted were always at the bottom of the heap. I solved my frustration by adding an …
Source
Table Saw Extension
Edited by Kari Hultman
Pages: 12-13
From the February 2012 issue #195.
Buy the issue now.
Three main design features enable it to work well. The runners are made of hard maple that resists wear and tear. The sliding mechanism is a dovetail that…
Read moreLong-reach Golf Ball Clamps
Sometimes you need to clamp parts that are out of reach of the throat depth of standard clamps. Here’s a design for a long-reach clamp that can be made from 2×4 lumber, 3⁄4” plywood or solid-wood …
Source