Blowout Beater
A coping sled is a must-have accessory for router table work. It helps you hold a narrow piece, such as a door rail, perpendicular to the fence and backs up the cut to prevent blowout. At least, it’s supposed to. …
Source
Category Archives: Tricks of the Trade
Budget Spring Clamp
This light-duty clamp is ideal for small parts-and easy to make by the dozen. All you need are a couple wood scraps, a rubber band, and a short piece of dowel rod. You can vary the pressure by changing the …
Source
Tablesaw Trap
Even with a zero-clearance throat plate in my tablesaw, a thin cut-off slips through now and then. These pieces can clog a vacuum hose or damage the blades of a dust collector. I made a trap to catch them by …
Source
Router Bit Nest
Watching an expensive router bit roll onto the floor is a heartbreaking experience. In the middle of a project, it can be a disaster. I drilled a few 1/2” and 1/4” holes in the edge of a piece of MDF …
Source
Instant Antique Hardware
New hardware is often way too shiny for my taste, so I chemically “age” it. If the metal is raw steel, I use standard gun bluing. But if it’s plated with zinc, I turn to Super Blue, a double-strength …
Source