Spindle-Sander Sharpening
Here’s a simple way to sharpen chisels using a 3″ sanding drum mounted in an oscillating spindle sander or a drill press. Cut a squared-up 2×4 the length of the sander’s table. Cut a 2″ deep by 1/2″ wide slot …
Source
Category Archives: Workshop Tips
Vacuum-Hose Dust Control
Dust is a real problem when you can’t use a router table’s fence and its dustport. Here’s a clever way to suck up that dust using your shop vacuum’s nozzle.
Source
Lamp Safety Screen
My lathe came with a lamp, but the lathe’s manual has this weird warning: “Position the work lamp so that wood chips do not accumulate inside the lamp shade and pose a fire hazard.” Now, where in the world could …
Source
Mini Shelf Pins
For small cabinets, I prefer to use small, discreet shelf pins that I make myself. I also make sleeves for the pins to fit into. Sleeves help hold the pins firmly in place. I make the pins from 1/16″ …
Source
Hacksaw Flush-Cutter
Flush-cutting dowels, corner keys or screw-hole plugs used to frustrate me because my saw’s teeth always left scratches on the project’s surface. Rather than buy a special flush-cutting saw, I made one from a hacksaw blade. I used my disc …
Sourc…