Ten-Minute Light Stand
I got tired of jury-rigging extra light for finishing, so I built this light stand from a 4-ft. length of 2×2 and 1/4-in. plywood. The 6-in. by 17-in. legs include 1/2-in. by 3- 1/2” feet. The post aligns with the …
Source
Category Archives: Workshop Tips
Safe Straightedge Storage
When I bought my expensive 24″ machinist’s straightedge, I wasn’t sure where to store it. It didn’t include a hole for hanging, and I was reluctant to drill into the hard steel for fear of devaluing the tool or compromising …
Source
Task Light Retro-Fit
I made a go-anywhere task light by retrofitting an old, broken fixture with a new, battery-powered LED light. First, I removed the cord and inner workings from the task light. Then I screwed a plywood disc into the light’s …
Source
‘Attractive’ Rest for a Combination Square
Some high-end combination squares have a built-in lip or tab for the purpose of resting the tool hands-free on a piece of wood. But because most common combination squares lack this handy feature, I developed this inexpensive solution. Simply …
S…
High And Dry Ply
After ruining four $90 sheets of plywood by storing them on a damp floor, I came up with a simple fix: PVC feet. Cut several 12″ sections of 2″ dia. PVC pipe in half, lengthwise. Apply traction tape to the …
Source