Foam-Tubing Seal
After hooking up my new dust collector to my contractor’s saw, I found that it just didn’t pull as much air as I’d like, even after sealing up the most obvious leaks. After further inspection, I found the problem: major …
Source
Category Archives: AW147
Cheap Blade Protectors
Here’s a dirt cheap way to store your saw blades and keep their carbide teeth from knocking into each other. Slip the blades onto a 3/8″ dia. landscape nail, using plastic coffee-can lids as spacers. I hang the nail on …
Source
Colonial Bench
Splayed legs add stability indoors or out. I demonstrate Windsor chair-making at the Common Ground Country Fair in Unity, Maine, an event that celebrates traditional crafts of all kinds. There’s never enough seating, so this year I resolved to build &#…
Read moreTesting for Square
On a crosscut sled, the fence must be absolutely square to the blade. Here’s a super-accurate method of testing for square. It makes errors easier to detect by magnifying them by a factor of four. The same method also works …
Source
Picture Frame Glue-up
Here’s a quick way to glue up a mitered frame of any size using only two clamps, with no worry that the frame will shift out of alignment. You’ll need two 1″ x 1″ hardwood bars (make them whatever length …
Source