Crosscut Sled Upgrade
Adding a hold-down to my shop-made crosscut sled makes the sled easier and safer to use. My parts don’t slip and my fingers are far from the blade because I don’t have to hold the workpiece. The hold-down swivels so …
Source
Adding a hold-down to my shop-made crosscut sled makes the sled easier and safer to use. My parts don’t slip and my fingers are far from the blade because I don’t have to hold the workpiece. The hold-down swivels so …
Source
CROSSCUT SLED CAM CLAMP I use a sled for cross cutting 3/4-in. melamine and plywood panels up to 24 inches wide. These panels can be hard to hold in position while making a cut, so I installed a cam lever …
Source
Instead of measuring for my circular saw’s offset each time I need to make a cut, I use a modified edge guide. I screwed two 3/4″ x 3/4″ x 12″ hardwood blocks to the front and back clamp bars of …
Source
My son is seven years old, and so far, I have tried to refrain from proselytizing woodworking to him. My hypothesis, at least for now, is that the love for woodworking should come naturally and be cultivated with joy. So …
Source
On a crosscut sled, the fence must be absolutely square to the blade. Here’s a super-accurate method of testing for square. It makes errors easier to detect by magnifying them by a factor of four. The same method also works …
Source